FAX: (541) 258-6968
 
88 Items Found
Axle Bumpers
Chevrolet Parts -  1952-1972 TRUCK FRONT & REAR AXLE BUMPER
FS-989
$7.50 EA
CHEVROLET 1952-1972 TRUCK FRONT & REAR AXLE BUMPER
This is a rubber Front & Rear Axle Bumper for 1952-1972 Chevrolet & GMC trucks. Dimensions: 1-3/4" x 2-1/4" x 5". Up to four required per vehicle. See applications below. Replaces GM# 3700034 Specific Applications: 1952 1-1/2 Ton - FRONT; 1955-1959 (2nd Series) Series 3 - FRONT & REAR; 1960-1962 D-D 4WD - FRONT; 1960-1969 Series 30 - REAR; 1968-1969 Series 20 w/133" Wheelbase (Exc. D-D) - REAR; Note: Bolt centers are 4" and may differ from some applications. Check before ordering.

For 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1932-55 TRUCK FRONT SPRING BUMPER
CV-393
$10.50 EA
CHEVROLET 1932-55 TRUCK FRONT SPRING BUMPER
This bumper fits on top of the front spring and is mounted in a cast housing. Correct for all 1932-1942 Chevrolet & GMC Utility trucks; 1940-1952 All Commercial (except Dubl-Duti); 1953-1955 (1st Series) 1/2 Ton trucks. Replaces GM#'s 368400 & 3653084

For 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-57 CAR REAR AXLE UPPER BUMPER
DC-861
$12.95 EA
CHEVROLET 1955-57 CAR REAR AXLE UPPER BUMPER
One required in center of car.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1955-57 CAR REAR AXLE LOWER BUMPER
DC-862
$12.95 PR
CHEVROLET 1955-57 CAR REAR AXLE LOWER BUMPER
1 PAIR

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1939-54 UPPER CONTROL ARM BUMPER
C-329
$13.95 PR
CHEVROLET 1939-54 UPPER CONTROL ARM BUMPER
Replaces #1298323 #3708834 #3687670 1939-52: All passenger (except JB & KB) 1953-54: Corvette & all passenger 1955-62: Corvette

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars


Chevrolet Parts -  1963-72 PU REAR AXLE BUMPERS-2WD-W/COIL SPRINGS
CV-394
$19.50 PR
CHEVROLET 1963-72 PU REAR AXLE BUMPERS-2WD-W/COIL SPRINGS
W/COIL SPRINGS

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1955-57 PASS AXLE BUMPER RETAINER
TN-152
$21.95 PR
CHEVROLET 1955-57 PASS AXLE BUMPER RETAINER
AXLE BUMPER RETAINER

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1941-54 REAR SPRING/FRAME BUMPER PLATE
60-425C
$69.50 EA
CHEVROLET 1941-54 REAR SPRING/FRAME BUMPER PLATE
REAR SPRING/FRAME BUMPER PLATE

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Axle Hardware
Chevrolet Parts -  1925-32 REAR AXLE SHAFT THICK WASHER
AF-176
$2.25 EA
CHEVROLET 1925-32 REAR AXLE SHAFT THICK WASHER
This thick rear axle washer is used on all 1925-1932 Chevrolet Passenger cars & 1/2 Ton trucks (except 1932 models with large axles). Replaces GM# 341705. Two washers required per vehicle. Dimensions: ID .812" x OD 1.460" x .214" Thick.

For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1916-23 AXLE SHAFT NUT 5/8" -18
AF-137
$2.95 EA
CHEVROLET 1916-23 AXLE SHAFT NUT 5/8" -18
This axle shaft nut fits all 1916-1923 Chevrolet cars and light trucks. Castle nut - hex OD 15/16", height 11/16".

For 1916 1917 1918 1919 1920 1921 1922 1923 Chevrolet Cars and Trucks


Chevrolet Parts -  1941-54 PASS & 1/2TON REAR AXLE OVERHAUL MANUAL
DG-51
$9.00 EA
CHEVROLET 1941-54 PASS & 1/2TON REAR AXLE OVERHAUL MANUAL
Details the rebuilding of a closed driveshaft to differential assembly.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Axle Seals
Chevrolet Parts -  1925-29 REAR AXLE OUTER FELT SEAL
AF-370
$6.50 EA
CHEVROLET 1925-29 REAR AXLE OUTER FELT SEAL
Passenger & 1/2 Ton models.

For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-33 1-1/2 TON AXLE SEAL - INNER
RW-500
$11.50 EA
CHEVROLET 1930-33 1-1/2 TON AXLE SEAL - INNER
This is a replacement rear axle INNER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Designed for 2" OD at seal surface on axle shaft. Part of assembly GM# 359526 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks


Chevrolet Parts -  1932 REAR AXLE OUTSIDE SEAL-LG AXLE
RW-183
$12.50 EA
CHEVROLET 1932 REAR AXLE OUTSIDE SEAL-LG AXLE
This seal is for Late 1932 models or replacement axles with Large Taper. Small axle diameter at hub 1.275 with 3/4" nut. Hub diameter at outer end: Large axle = 1.127"; Small axle = 1.033". Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-32 REAR AXLE OUTSIDE SEAL
RW-41
$12.50 EA
CHEVROLET 1930-32 REAR AXLE OUTSIDE SEAL
This rear axle seal fits all 1930-1931 Chevrolet passenger cars & 1/2 ton trucks. It also fits Early 1932 models with Small Taper. Small axle diameter at hub 1.275 with 3/4" nut.Hub diameter at outer end: Large axle = 1.127"; Small axle = 1.033". Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1951-63 NAPCO 4X4 FRONT KNUCKLE FELT SEALS
TR-663
$12.50 SET
CHEVROLET 1951-63 NAPCO 4X4 FRONT KNUCKLE FELT SEALS
NAPCO 4X4 FRONT KNUCKLE FELT SEALS

For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1946-81 3/4-1TON REAR AXLE SEAL
RW-531
$12.95 EA
CHEVROLET 1946-81 3/4-1TON REAR AXLE SEAL
1946-81 3/4-1TON REAR AXLE SEAL

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks


Chevrolet Parts -  1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
RW-499
$15.50 EA
CHEVROLET 1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
This is a replacement rear axle OUTER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Part of assembly GM# 359326 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks


Chevrolet Parts -  1933-1954 CAR REAR AXLE SEAL
FS-219
$16.75 EA
CHEVROLET 1933-1954 CAR REAR AXLE SEAL
This rear axle seal fits 1933-1954 Chevrolet passenger cars. Replaces GM# 3663166 Specific Applications: Dimensions: ID 1.578" or 40.08mm; OD 2.408" or 61.16mm; .500" thick or 12.70mm

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1958-64 PASSENGER REAR AXLE SEAL
RW-240
$18.50 EA
CHEVROLET 1958-64 PASSENGER REAR AXLE SEAL
1958-64 PASSENGER REAR AXLE SEAL

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1933-63 PU/'33-42 CAR  REAR AXLE SEAL
FS-220
$24.50 EA
CHEVROLET 1933-63 PU/'33-42 CAR REAR AXLE SEAL
This rear axle seal fits 1933-1963 Chevrolet cars & trucks. Replaces GM# 592441. Specific Applications: 1946-1963 1/2 Ton Models Dimensions: Thickness: .500" or 12.70mm; OD: 2.782" or 70.66mm; ID: 1.875" or 47.63mm

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-56 PASSENGER REAR AXLE SEAL
RW-218
$29.50 EA
CHEVROLET 1955-56 PASSENGER REAR AXLE SEAL
1955-56 PASSENGER REAR AXLE SEAL

For 1955 1956 Chevrolet Cars


Chevrolet Parts -  1937-1959 1-1/2 & 2 TON AXLE SEAL - HUB SEAL
FS-294
$42.50 EA
CHEVROLET 1937-1959 1-1/2 & 2 TON AXLE SEAL - HUB SEAL
This hub seal fits 1937-1959 Chevrolet Utility trucks (1-1/2 & 2 Ton models). The specific applications are: 1952-1959 Utility (exc. 2-Spd Axle) OD 4.630 (117.62mm)ID 3.073 (78.06mm)

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks


Chevrolet Parts -  1925-31 REAR AXLE INNER SEAL ASSY.
AF-82
$47.50 EA
CHEVROLET 1925-31 REAR AXLE INNER SEAL ASSY.
The inner axle seal does the most to prevent oil leaks on early cars & pickups. It is likely that 80-90 year old seals are not doing what they need to do to prevent leaks. Replace this vital seal before you need to replace your brake linings from being oil soaked.Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on 1925-1931 Chevrolet passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing. Also see the outer seal replacement RW-41.

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE INNER SEAL ASSY.
AF-506
$48.50 EA
CHEVROLET 1932 REAR AXLE INNER SEAL ASSY.
Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1925-1929 REAR AXLE SEAL KIT
AF-370K
$112.50 KIT
CHEVROLET 1925-1929 REAR AXLE SEAL KIT
This kit replaces all of the rear axle seals and gaskets for 1925-1929 Chevrolet Passenger & 1/2 Ton Light Duty models. Each kit has two inner neoprene seal assemblies (AF-82); two outer felt seals (AF-370) and two rear axle bearing retainer gaskets (G-3725). Kit will replace seals for both sides.

For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-1931 REAR AXLE SEAL KIT
AF-82K
$122.50 EA
CHEVROLET 1930-1931 REAR AXLE SEAL KIT
This seal kit includes two inner neoprene seal assemblies (AF-82); two outer neoprene seals that replace the felt (Use with the original seal housing); and two outer seal retainer gaskets. This kit gives you all the components necessary to replace the 85 year old original axle seals in a 1930-1931 Chevrolet passenger car & 1/2 ton truck differential. Kit will do both sides.

For 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE SEAL KIT - SMALL AXLE
AF-506SM
$122.50 KIT
CHEVROLET 1932 REAR AXLE SEAL KIT - SMALL AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-41 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH SMALL TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE SEAL KIT - LARGE AXLE
AF-506LG
$122.50 EA
CHEVROLET 1932 REAR AXLE SEAL KIT - LARGE AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-183 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH LARGE TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.

For 1932 Chevrolet Cars and Trucks

Drop Axle
Chevrolet Parts -  1947-55 1ST SERIES PICKUP 3" DROP AXLE
47-DA
Wait List
CHEVROLET 1947-55 1ST SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. INCLUDES TIE PLATES. NOTE: YOU MUST PURCHASE THE FS-255 (1955-59TRUCK) KING BOLT SET WHEN YOU PURCHASE THIS DROP-AXLE! THE 47-54 KING BOLT SET WILL NOT WORK WITH THIS AXLE. ALSO YOU WILL NEED TO UPGRADE TO A MODERN TIE ROD AND ENDS, SEE PART NUMBER 47-TRK.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-59 2ND SERIES PICKUP 3" DROP AXLE
55-DA
Wait List
CHEVROLET 1955-59 2ND SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. INCLUDES TIE PLATES. NOTE: YOU WILL NEED TO SWITCH TO MODERN STYLE TIE ROD & ENDS - SEE PART NUMBER 55-TRK.

For 1955 1956 1957 1958 1959 Chevrolet Trucks

Dust Caps
Chevrolet Parts -  1933-60 CAR & 1/2 TON DUST CAP - CHROME
FS-431C
$10.50 PR
CHEVROLET 1933-60 CAR & 1/2 TON DUST CAP - CHROME
Fits 1933-42 passenger cars & commercial (except CC,DC,EC,FC,GA & HA), AND 1946-60 passenger & 1/2 ton. This dust cap is a replacement for the original. While not looking exactly like the original - it does an excellent job.CONFIRM 2.07 OD ~ WILL NOT FIT EVERY APPLICATION

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks

Hub Puller Tool Rental
Chevrolet Parts -  1930-1932 HUB PULLER RENTAL
AF-600
$35.00 EA
CHEVROLET 1930-1932 HUB PULLER RENTAL
This tool is used to pull the rear brake drum on 1930-1932 Chevrolet absolute necessity during this procedure. There is a $250.00 deposit on this rental item. Returnthe tool - in good condition and receive a refund of $215.00 - if returned in good condition within 30 days. Rental is $25.00 per week after 30 days.

For 1930 1931 1932 Chevrolet Cars and Trucks

Rear Axle Conversion Kit
Chevrolet Parts -  1955-59 PU REAR AXLE CONV. KIT
55-RCK
$89.00 KIT
CHEVROLET 1955-59 PU REAR AXLE CONV. KIT
THIS CONVERSION KIT ALLOWS THE INSTALLATION OF ANY 3" DIAMETER REAR END, INCLUDING GM 10 BOLT, GM 12 BOLT, F-BODY 7.5" OR FORD 9". CAN ALSO BE USED AS A FLIP KIT FOR A 4" TO 5" DROP. WELDING IS REQUIRED. THIS KIT ALSO PROVIDES PROVISIONS FOR MODERN SHOCK ABSORBER MOUNTING, A VAST IMPROVEMENT OVER THE ORIGINAL LEVER-ACTION SHOCKS.

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1947-55 PU REAR AXLE CONV. KIT
47-RCK
$139.00 KIT
CHEVROLET 1947-55 PU REAR AXLE CONV. KIT
THIS CONVERSION KIT ALLOWS THE INSTALLATION OF ANY 3" DIAMETER REAR END, INCLUDING GM 10 BOLT, GM 12 BOLT, F-BODY 7.5" OR FORD 9". WELDING IS REQUIRED. THIS KIT ALSO PROVIDES PROVISIONS FOR MODERN SHOCK ABSORBER MOUNTING, A VAST IMPROVEMENT OVER THE ORIGINAL LEVER-ACTION SHOCKS.

For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Rear Axle Shafts
Chevrolet Parts -  1925-1929 CAR/PICKUP REAR AXLE SHAFT
CV-711
$395.00 EA
CHEVROLET 1925-1929 CAR/PICKUP REAR AXLE SHAFT
This is a direct replacement Rear Axle Shaft for all 1925-1929 Chevrolet cars & 1/2 ton trucks. These are newly manufactured axles that have been machined from Tempered Chrome Moly. Dimensions: Length - 30.812" , Thread Size - 3/4-16, Spline Dia. 1.130". Made in the USA! Replaces GM# 344036, 355519 Note: Axles ship with a replacement nut. This part is oversize and additional delivery charges will apply. Call or email us for a freight quote.

For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-1931 CAR/PICKUP REAR AXLE SHAFT
CV-712
$395.00 EA
CHEVROLET 1930-1931 CAR/PICKUP REAR AXLE SHAFT
This is a direct replacement axle for all 1930 & 1931 Chevrolet passenger cars & 1/2 ton trucks. These are newly manufactured axles that have been machined from Tempered Chrome Moly. Dimensions: Length - 30.812" , Thread Size - 3/4-16, Spline Dia. 1.225". Made in the USA! Replaces GM# 357497 Note: Axles ship with an incorrect nut which is just there to protect the threads. Do not use this nut for operation. Order replacement nut AF-197 separately. This part is oversize and additional delivery charges will apply. Call or email us for a freight quote.

For 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 SMALL TAPER REAR AXLE SHAFT
CV-720
Wait List
CHEVROLET 1932 SMALL TAPER REAR AXLE SHAFT
This is a new replacement axle for 1932 Chevrolet passenger cars & 1/2 ton trucks. NOTE: This is a replacement for the 1932 SMALL TAPER AXLE ONLY. Small axle diameter at hub 1.275 with 3/4" nut. Hub diameter at outer end is 1.033". Early 1932 models came from the factory with the small taper axles. In mid-year 1932 there was a change to large taper axles. Large taper axles have a diameter at the hub of 1.375" and use a 13/16" nut. Hub diameter on large axles at the outer end is 1.127". COMPARE TO YOUR ORIGINAL BEFORE ORDERING - LARGE & SMALL AXLES DO NOT INTERCHANGE. These are newly manufactured axles that have been machined from a tempered chromium-molybdenum steel with approximately 140,000 psi tensile strength and a hardness of RC28-32, providing superior strength and toughness along with excellent surface hardness on the taper, seal and splines. **IMPORTANT** This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.

For 1932 Chevrolet Cars and Trucks

Seals
Chevrolet Parts -  1963-81 3/4T-1 TON FRONT WHEEL SEAL
RW-565
$7.00 EA
CHEVROLET 1963-81 3/4T-1 TON FRONT WHEEL SEAL
1963-81 3/4T-1 TON FRONT WHEEL SEAL

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks


Chevrolet Parts -  1961-68 CAR FRONT WHEEL SEAL
AF-133
$9.50 EA
CHEVROLET 1961-68 CAR FRONT WHEEL SEAL
Passenger - FRONT

For 1961 1962 1963 1964 1965 1966 1967 1968 Chevrolet Cars


Chevrolet Parts -  1941-1959 FRONT WHEEL SEAL
FS-213
$13.50 EA
CHEVROLET 1941-1959 FRONT WHEEL SEAL
1941-42 All; 1946-54 All Passenger; 1946-59 All 1/2 Ton Truck.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-57 PASSENGER FRONT WHEEL SEAL
RW-219
$13.50 EA
CHEVROLET 1955-57 PASSENGER FRONT WHEEL SEAL
1955-57 PASSENGER FRONT WHEEL SEAL

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1925-54 MODIFIED FRONT WHEEL SEAL
FS-213M
$14.50 EA
CHEVROLET 1925-54 MODIFIED FRONT WHEEL SEAL
MODIFIED FRONT WHEEL SEAL

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1949-54 CAR FRONT OIL DEFLECTOR
3687629
$14.95 EA
CHEVROLET 1949-54 CAR FRONT OIL DEFLECTOR
This is the part that fits between the front axle grease seal and the wheel spindle for 1949-1954 Chevrolet passenger cars & 1953-1962 Corvette. This part is a replacement for worn or damaged part. Dimensions: 1-17/32" ID x 3-7/16" OD. Replaces GM# 3687629.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1958-60 CAR FRONT WHEEL SEAL
AF-129
$16.50 EA
CHEVROLET 1958-60 CAR FRONT WHEEL SEAL
Passenger - FRONT

For 1958 1959 1960 Chevrolet Cars


Chevrolet Parts -  1960-72 1/2 TON W/4WD FRONT WHEEL SEAL
AF-580
$16.50 EA
CHEVROLET 1960-72 1/2 TON W/4WD FRONT WHEEL SEAL
FITS THE FOLLOWING: GM#909066

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1960-61 1/2 TON FRONT WHEEL SEAL
AF-557
$16.50 EA
CHEVROLET 1960-61 1/2 TON FRONT WHEEL SEAL
FITS THE FOLLOWING: GM#909066

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1935-59 UTILITY FRONT WHEEL SEAL
RW-458
$19.50 EA
CHEVROLET 1935-59 UTILITY FRONT WHEEL SEAL
1935-42: Utility (Exc. COE, H.D., MT, MY) 1946-59: 3/4 ton 1 ton and 1 1/2 ton (Exc. UJ, UK, VJ, VK, SBC, H.D.)

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1933-36 STANDARD FRONT WHEEL SEAL
RW-719
$19.95 EA
CHEVROLET 1933-36 STANDARD FRONT WHEEL SEAL
MODELS CC, DC,EC & FC ONLY

For 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1916-40 CAR/TRUCK FRONT WHEEL SEAL
FS-202
$22.50 EA
CHEVROLET 1916-40 CAR/TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1916-1940 Chevrolet & GMC cars & trucks. This seal is a neoprene replacement seal for the original felt wheel seal. Replaces GM# 335448, 352488, National 5070 Specific Applications:1916-1930 All Passenger & Truck; 1931-40 Passenger and Commercial (exc Utility or 1933-1936 Standard Passenger)

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT WHEEL SEAL
FS-202T
$29.50 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks. This seal is a NORS replacement for the original felt wheel seal. Dimensions: ID = 1.97 (50mm); OD = 3.16 (80mm) Replaces GM# 365277 Limited Supply. Specific Applications:1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks - Series: LT, M, N, O, P, Q. In 1935, fits early production trucks through Feb. 1, 1935.

For 1931 1932 1933 1934 1935 Chevrolet Trucks

Wheel Bearings
Chevrolet Parts -  1955-64 WHEEL BEARING RETAINER GASKET
G-4345
$1.65 EA
CHEVROLET 1955-64 WHEEL BEARING RETAINER GASKET
This is a wheel bearing retainer gasket for 1955-1964 Chevrolet passenger cars. 4-1/8" x 4-11/32" - four holes. Replaces GM# 3772374

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1923-1961 FRONT BALL BEARING-OUTER
FS-177
$29.95 EA
CHEVROLET 1923-1961 FRONT BALL BEARING-OUTER
This is a complete OUTER FRONT BALL bearing assembly for 1923-1961 Chevrolet & GMC cars & trucks. Dimensions: OD 2 5/64" (2.078"), ID 3/4" (.722"). Replaces GM# 909567, 909667, 909767, 909067, 909501, 909601, 909701, 909001, B-01, B-67 Specific Applications: 1955-1960: Passenger;1955-1961: 1/2 Ton Truck (exc. 4WD)

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1955 PASSENGER FRONT WHEEL BEARING - OUTER
FS-63
$39.50 EA
$29.95 EA ON SALE
CHEVROLET 1955 PASSENGER FRONT WHEEL BEARING - OUTER
This FRONT OUTER Wheel Bearing Assembly fits 1955 Chevrolet passenger cars. Replaces GM# 909041, ND 909041

For 1955 Chevrolet Cars


Chevrolet Parts -  1933-1941 AXLE SHAFT INNER BEARING RACE
NOS-111120
$39.50 EA
CHEVROLET 1933-1941 AXLE SHAFT INNER BEARING RACE
This is a NORS Rear Axle Shaft Bearing INNER RACE for 1933-1941 Chevrolet Passenger Cars. This is a LIMITED SUPPLY ITEM. Availability is subject to stock on hand. GM# 111120, Hyatt IR-1500 Specific Applications: 1937-1941 Passenger Cars

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 Chevrolet Cars


Chevrolet Parts -  1933-1940 REAR AXLE BEARING INNER RACE
NOS-111122
$39.50 EA
CHEVROLET 1933-1940 REAR AXLE BEARING INNER RACE
This is a NORS Rear Axle Shaft Bearing INNER RACE for 1933-1940 Chevrolet cars & trucks. This is a LIMITED SUPPLY ITEM. Availability is subject to stock on hand. GM# 111122, also Hyatt IR-1502. Specific Applications: 1933-1940 Truck (exc. Utility, KD,KE,KF)

For 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-61 FRONT TAPERED BEARING-OUTER
FS-177R
$45.00 EA
CHEVROLET 1923-61 FRONT TAPERED BEARING-OUTER
See also FS-178K, FS-216K or FS-66K for tapered roller bearing kit to replace all four inner and outer ball bearings with tapered roller type bearings. Bearing ID is .75" and OD is 2.08", Thick - 0.67"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STD FRONT WHEEL BEARING-INNER
FS-37
$49.00 EA
CHEVROLET 1933-36 STD FRONT WHEEL BEARING-INNER
This is a NORS wheel bearing - FRONT INNER for 1933-1936 Chevrolet Standard Models Only. Replaces GM # 909022, 909522, 909622, 909722 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.

For 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-41PASS. REAR WHEEL INNER RACE
FS-316R
$49.50 EA
CHEVROLET 1933-41PASS. REAR WHEEL INNER RACE
This rear axle bearing race fits 1933-1941 Chevrolet passenger cars. Replaces GM# 111120 Specific Applications:1933-1936 Standard Passenger Models (CC,DC,EC,FC only); 1937-1941 All passenger & Sedan Delivery

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 Chevrolet Cars


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT OUTER BEARING
B-23
$49.95 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT OUTER BEARING
This is a complete OUTER FRONT WHEEL BALL Bearing Assembly for 1931-1935 Chevrolet & GMC Trucks. Dimensions: ID .750"; OD 1.310". For 1-1/2 Ton models. In 1935, fits early production trucks through Feb. 1, 1935. Limited Supply. Replaces GM# 909023, 909523, 909623, 909723 Specific Applications:1931-1935 Utility Models LT, M, N, O, P, Q - 1-1/2 Ton Trucks

For 1931 1932 1933 1934 1935 Chevrolet Trucks


Chevrolet Parts -  1925-59 FRONT TAPERED WHEEL BEARING-INNER
FS-216R
$55.00 EA
CHEVROLET 1925-59 FRONT TAPERED WHEEL BEARING-INNER
This is an INNER TAPERED ROLLER FRONT wheel bearing 1925-1959 Chevrolet & GMC cars & trucks. This bearing replaces the original ball bearing type with tapered roller type bearing. Dimensions: OD 2.966" (75.33mm) x ID 1.281" (32.53mm). Replaces GM# 909052, 909552, 909602, 909702 Specific Applications: 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenger; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: To use this bearing on 1925-1940 passenger & 1/2 ton models (except 1933-35 Standard & Utility), you must also purchase and install FS-178RA bearing adapter.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-57 FRONT WHEEL BEARING - INNER
FS-66
$55.00 EA
CHEVROLET 1955-57 FRONT WHEEL BEARING - INNER
This is an INNER wheel bearing assembly for all 1955-1957 Chevrolet passenger cars. Replaces GM# 909040, ND 909040

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1935-1952 TRUCK FRONT BALL BEARING-OUTER
B-25
$55.00 EA
CHEVROLET 1935-1952 TRUCK FRONT BALL BEARING-OUTER
This is a complete OUTER FRONT WHEEL BALL Bearing Assembly for 1935-1952 Chevrolet & GMC Trucks. Dimensions: ID .8435"; OD 2.250". Replaces GM# 909525, 909625, 909725, 909025 Specific Applications:1935-1942 Utility (exc. COE, MT, MY); 1946-1950 3/4 - 1-1/2 Ton (exc. SBC); 1951-1952 3/4 & 1 Ton

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 PASS-1/2TON REAR WHEEL BEARING
RW-456
$59.50 EA
CHEVROLET 1932 PASS-1/2TON REAR WHEEL BEARING
This bearing is for the rear axle on all 1932 Chevrolet passenger cars & 1/2 ton trucks. Two required per vehicle. Dimensions: OD - 3.151" (80.09 mm), ID - 1.571" (39.90 mm). Replaces GM# 901208, ND 1208.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1953-1967 TRUCK FRONT BALL BEARING-INNER
B-44
$59.95 EA
CHEVROLET 1953-1967 TRUCK FRONT BALL BEARING-INNER
This is an INNER FRONT Wheel Bearing for 1953-1967 Chevrolet & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks. Replaces GM# 909044, ND 909648 Specific Applications: 1953-1959 3/4 & 1 Ton, exc. HD; 1960-1966 D-D (exc. 102" W.B.) 1967 Series 20 & 30(D-D) exc. 11,000 lb. Axle

For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 Chevrolet Cars and Trucks


Chevrolet Parts -  1946-72 3/4 & 1TON OUTER REAR WHEEL BEARING
188932
$63.50 EA
CHEVROLET 1946-72 3/4 & 1TON OUTER REAR WHEEL BEARING
This is an OUTER REAR Wheel Bearing for 1946-1972 Chevrolet & GMC 3/4 & 1 Ton Trucks. Wheel Bearing and Race set. Dimensions: Cone Bore=2.0312", Cone Length=0.875", Cone Radius=0.078", Cup Outer Diam=3.5433, Cup Length=0.625", Cup Radius=0.078". Replaces GM# 188932, HY B11630, HY 11630Z Specific Applications:1946-1966 3/4 & 1 TON (exc. 11,000# AXLE) - Series 20 & 30; 1967-1972 Series 20 & 30, G-30 (exc. 11,000# AXLE)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1933-1954 CAR REAR WHEEL BEARING
FS-316
$65.00 EA
CHEVROLET 1933-1954 CAR REAR WHEEL BEARING
This is a new rear axle bearing that fits 1933-1954 Chevrolet passenger cars. Dimensions: OD 2.405 - (61.09mm); ID 1.588 (40.35mm); Thick .751 (19.08mm). Replaces GM# 111119, Hyatt OR1500 Specific Applications:1933-1936 Standard Passenger Models(CC,DC,EC,FC); 1937-1954 All Passenger Models

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1933-63CAR/PU REAR WHEEL BEARING
FS-315
$66.50 EA
CHEVROLET 1933-63CAR/PU REAR WHEEL BEARING
This is a new REAR AXLE SHAFT Bearing for 1933-1963 Chevrolet & GMC cars & trucks. Dimensions: OD: 2.781" x ID: 1.878" x Thick: .885". Replaces GM# 111121, Hyatt OR1502 Specific Applications:1933-1936: Passenger (exc. 1933-36 Standard models:CC,DC,EC,FC); 1933-1939: All Trucks (except Utility); 1940-1963 1/2 Ton trucks

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks


Chevrolet Parts -  1946-1972 CARRIER & INNER REAR WHEEL BEARING
188930
$69.50 EA
CHEVROLET 1946-1972 CARRIER & INNER REAR WHEEL BEARING
This is a Differential Carrier Bearing and Inner Rear Wheel Bearing for 1946-1972 Chevrolet & GMC trucks. Bearing and Race together. Replaces GM #188930, Hyatt D11786, 11786Y Specific Applications: 1957-1959 Series 3E-3G with 4WD; 1968 Series 20 (exc. leaf springs, D-D, 4WD, 396; 1969 Series 20 (exc. D-D, 4WD, LPG, 396); 1971-1972 Series. 20-30, G-30 (EXC. 11,000# AXLE)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1916-32 WHEEL,  PINION & PROP. SHAFT BEARING
RW-455
$69.95 EA
CHEVROLET 1916-32 WHEEL, PINION & PROP. SHAFT BEARING
This bearing fits 1916-1932 Chevrolet cars & trucks as a REAR wheel bearing, REAR differential pinion bearing and REAR propeller shaft bearing. Dimensions: OD - 3.151" (80.09 mm); ID - 1.371" (34.8 mm); Thick .834" (21.18mm). It is a single row bearing. Replaces GM# 901307 & ND 1307 Specific Applications: 1916-1931 Passenger cars & 1/2 ton truck - REAR WHEEL BEARING;1929-1932 Passenger cars & 1/2 ton truck - REAR DIFFERENTIAL PINION BEARING

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-1956 PASSENGER REAR WHEEL BEARING
FS-661
$69.95 EA
CHEVROLET 1955-1956 PASSENGER REAR WHEEL BEARING
This is a REAR Wheel Bearing for 1955-1956 Chevrolet Passenger Cars. Bearing comes with retaining ring. Replaces GM# 3799122, ND RW507BSY-1BC

For 1955 1956 Chevrolet Cars


Chevrolet Parts -  1958-1960 PASS FRONT BALL BEARING-INNER
B-70
$69.95 EA
CHEVROLET 1958-1960 PASS FRONT BALL BEARING-INNER
This is a complete INNER FRONT BALL bearing assembly for 1958-1960 Chevrolet Passenger Cars. Replaces GM# 909070, ND 909070 Specific Applications:1958-1960 Passenger, exc. Taxi

For 1958 1959 1960 Chevrolet Cars


Chevrolet Parts -  1953-1967 TRUCK FRONT BALL BEARING-OUTER
B-47
$72.00 EA
CHEVROLET 1953-1967 TRUCK FRONT BALL BEARING-OUTER
This is an OUTER FRONT Wheel Bearing for 1953-1967 Chevrolet & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks. Replaces GM# 909047, ND 909547, ND 909725, ND 909673 Specific Applications: 1953-1959 3/4 & 1 Ton, exc. HD; 1960-1966 D-D (exc. 102" W.B.) 1967 Series 20 & 30(D-D) exc. 11,000 lb. Axle

For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 Chevrolet Cars and Trucks


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT INNER BEARING
B-24
$79.50 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT INNER BEARING
This is a complete INNER FRONT WHEEL BALL Bearing Assembly for 1931-1935 Chevrolet & GMC Trucks. Dimensions: ID .750"; OD 1.310". For 1-1/2 Ton models. In 1935, fits early production trucks through Feb. 1, 1935. Limited Supply. Replaces GM# 909024 Specific Applications:

For 1931 1932 1933 1934 1935 Chevrolet Trucks


Chevrolet Parts -  1941-59 FRONT BALL BEARING-INNER
FS-216
$79.95 EA
CHEVROLET 1941-59 FRONT BALL BEARING-INNER
This is the INNER Front Wheel Ball Bearing assembly for 1941-1959 Chevrolet & GMC cars & trucks. The inner bearing is 1.280" ID and 2.961" OD. Replaces GM# 909052, 909552, 909602, 909702 Specific Applcations:1941-1942: All Cars & Trucks (exc. Utility); 1946-1954: Passenger, including Sedan Delivery; 1946-1959: 1/2 Ton Trucks Also see FS-216K for a tapered roller bearing replacement kit for the original ball bearings.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1956-57 FRONT ROLLER BEARING - INNER
FS-66R
$89.50 EA
CHEVROLET 1956-57 FRONT ROLLER BEARING - INNER
Also see FS-66K for a tapered roller bearing replacement kit for the original ball bearings.

For 1956 1957 Chevrolet Cars


Chevrolet Parts -  1935-1952 TRUCK FRONT BALL BEARING-INNER
B-26
$89.50 EA
CHEVROLET 1935-1952 TRUCK FRONT BALL BEARING-INNER
This is a complete INNER FRONT WHEEL BALL Bearing Assembly for 1935-1952 Chevrolet & GMC Trucks. Dimensions: ID 1.405"; OD 3.150". Replaces GM# 909526, 909626, 909726, 909026 Specific Applications:1935-1942 Utility (exc. COE, MT, MY); 1946-1950 3/4 - 1-1/2 Ton (exc. SBC); 1951-1952 3/4 & 1 Ton

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-40 FRONT BALL BEARING-INNER
FS-178
$89.95 EA
CHEVROLET 1923-40 FRONT BALL BEARING-INNER
This is a complete INNER Front Ball Bearing assembly for all 1925-1940 Chevrolet & GMC cars & trucks (Exc 1933-1936 Standard & 1931-1940 Utility trucks). Dimensions: OD 2.961"; ID inner race 1.179". Replaces GM# 909502, 909602, 909702, 909002 See also FS-178K tapered roller bearing replacement kit.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1957 PASSENGER REAR WHEEL BEARING
FS-704
$89.95 EA
CHEVROLET 1957 PASSENGER REAR WHEEL BEARING
This is a REAR Wheel Bearing for 1957 Chevrolet Passenger Cars. Bearing comes with retaining ring. Replaces GM# 3799123, ND 904262, 904278

For 1957 Chevrolet Cars


Chevrolet Parts -  1958-64 PASSENGER REAR AXLE BEARING
RW-241
$95.00 EA
CHEVROLET 1958-64 PASSENGER REAR AXLE BEARING
This is a rear axle bearing for 1958-1964 Chevrolet Passenger Cars. It is a ball bearing and two are required per car. Replaces GM# 907294, ND RW607SY12

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1933-36 STD FRONT WHEEL BEARING-OUTER NORS
FS-34
$95.00 EA
CHEVROLET 1933-36 STD FRONT WHEEL BEARING-OUTER NORS
This is a NORS wheel bearing - FRONT OUTER for 1933-1936 Chevrolet Standard Models Only. Dimensions: OD 1.873", ID .657". Replaces GM # 909021, 909521, 909621, 909721 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.

For 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-40 TAPERED ROLLER BEARING - INNER
FS-178R
$95.00 EA
CHEVROLET 1923-40 TAPERED ROLLER BEARING - INNER
All, except 1933-36 Standard & Utility. This bearing is FS-216R with adapter FS-178RA installed. NOTE: Requires using FS-213 Wheel Seal.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1960-61 1/2 TON FRONT BALL BEARING-INNER
B-66
$99.95 EA
CHEVROLET 1960-61 1/2 TON FRONT BALL BEARING-INNER
This is the INNER Front Wheel Bearing assembly for 1960-1961 Chevrolet & GMC 1/2 Ton trucks. Replaces GM# 909066, ND 909566, ND 909762, ND 909666 Specific Applcations:1960-1961 Chevy & GMC 1/2 Ton Trucks (exc 4WD)

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1960-61 SER. 20-40 (EXC 4WD) FRONT INNER WHEEL BEARING
B-48
$129.95 EA
CHEVROLET 1960-61 SER. 20-40 (EXC 4WD) FRONT INNER WHEEL BEARING
This is the INNER Front Wheel Bearing assembly for 1960-1961 Chevrolet & GMC 3/4, 1 & 1-1/2 Ton trucks. Replaces GM# 90948 Specific Applcations:1960-1961 Chevy & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks (exc 4WD, DD) - Series 20, 30 & 40

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1956-57 PASS. TAPERED BEARING KIT
FS-66K
$179.50 EA
CHEVROLET 1956-57 PASS. TAPERED BEARING KIT
This kit fits 1956-1957 Chevrolet passenger cars. They replace the original ball bearings with tapered roller bearings. Replaces GM# 909040, 909067

For 1956 1957 Chevrolet Cars


Chevrolet Parts -  1941-59 FRONT TAPERED WHEEL BEARING KIT
FS-216K
$189.50 KIT
CHEVROLET 1941-59 FRONT TAPERED WHEEL BEARING KIT
This is a TAPERED ROLLER FRONT wheel bearing kit for 1941-1959 Chevrolet & GMC cars & trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 INNER and 2 OUTER tapered roller bearings with 2 Front Wheel Seals, made especially for this installation. OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm). Replaces GM# 909001, 909052, 909501, 909601, 909701, 909552, 909602, 909702 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenger; 1946-1959 Chevy & GMC 1/2 Ton TrucksNOTE: Check your original bearing numbers BEFORE ordering!

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-64 CAR FRONT TAPERED BEARING CONV KIT
FS-1028
$199.95 KIT
CHEVROLET 1955-64 CAR FRONT TAPERED BEARING CONV KIT
Kit comes complete with new forged aluminum hubs, studs, inner bearings, outer bearings, races, grease seals, hub caps, and spindle nut washers. Easy to install, fits with stock brake drums.

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1923-1940 FRONT TAPERED BEARING KIT
FS-178K
$249.50 SET
CHEVROLET 1923-1940 FRONT TAPERED BEARING KIT
This is a tapered FRONT wheel bearing kit for 1923-1940 Chevrolet car & Chevy & GMC trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 each INNER and 2 each OUTER tapered roller bearings with 2 each front wheel seals, made especially for this installation. Replaces GM# 909001, 909002, 909501, 909601, 909701, 909502, 909602, 909702 Specific Applications: OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm)

For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks

88 Items Found