FAX: (541) 258-6968
 

Weighs 2.0000lbs.

This In-Tank Fuel Pump is for use with our street rod tanks. This electric fuel pump is designed for use with tuned-port injection engines that require high pressure fuel pumps. Adjustable from 7 to 10.5" depth. This pump runs 48-54 gallons per hour.\

*Made in the USA
*Heavy 10 gauge no-warp mounting plate
*1/4" NPT Supply and Return Line
*Barbed Vent Fitting
*Oven brazed fittings
*Up to 100 PSI
*In-tank wire harness
*Genuine Walbro Fuel Pumps

The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

We use Walbro high-performance pumps in all of our fuel injection modules, and we offer different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)

The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.

This part fits most 1941 1942 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.


This product can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm.
For more information go to www.P65Warnings.ca.gov

Share |

TK-48M
$230.00 EA