FAX: (541) 258-6968
 

Weighs 11.2200lbs.

This is a new replacement axle for 1932 Chevrolet passenger cars & 1/2 ton trucks. NOTE: This is a replacement for the 1932 SMALL TAPER AXLE ONLY. Small axle diameter at hub 1.275 with 3/4" nut. Hub diameter at outer end is 1.033". Early 1932 models came from the factory with the small taper axles.

In mid-year 1932 there was a change to large taper axles. Large taper axles have a diameter at the hub of 1.375" and use a 13/16" nut. Hub diameter on large axles at the outer end is 1.127". COMPARE TO YOUR ORIGINAL BEFORE ORDERING - LARGE & SMALL AXLES DO NOT INTERCHANGE.

These are newly manufactured axles that have been machined from a tempered chromium-molybdenum steel with approximately 140,000 psi tensile strength and a hardness of RC28-32, providing superior strength and toughness along with excellent surface hardness on the taper, seal and splines. **IMPORTANT**
It is imperative that a new inner axle seal be installed prior to installing the new axle.
This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.

This part fits most 1932 Chevrolet Cars and Trucks.; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.


This product can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm.
For more information go to www.P65Warnings.ca.gov

Share |
The following items are recommended to be purchased with this item.
Enter the qty to purchase and click Add to Cart to order all items at the same time